HomeArtwork checker

PlasticCard.nz · Artwork tools

Free plastic card templates & artwork checker

PlasticCard.nz supplies custom printed plastic cards for New Zealand businesses and organisations. Start your design with a free CR80 artwork template, or preview the front and back of a design you already have.

Choose layered PSD for Photoshop, SVG for Illustrator, or PDF and PNG templates. Set your card features, bleed and safe margins, then download a blank template or add artwork to check its fit.

Our cards are compliant with ISO/IEC 7810 ID-1 standard.

Your artwork stays on your deviceYour files are opened and checked in your browser. They are not uploaded to PlasticCard.nz.

  1. Set up your card
  2. Add your artwork
  3. Review the results

Set up your card preview

CR80 / ID-1 · 85.60 × 53.98 mm

Card features and keep-clear areas

Card types are starting layouts. Adjust the features to match your order. Slot edge names refer to the front in landscape; the back shows the matching physical cut. Confirm the layout when ordering. Ordinary artwork can print over the embedded RFID/NFC antenna zone; check holes, slots, embossing and metallic finishes with us.

Add your card artwork

Your card artwork preview appears here.
Drag & drop front artwork here

PDF · PNG · JPG · SVG · AI*Up to 50 MB per file

Finished card
85.60 × 53.98 mm
Artwork including bleed
89.60 × 57.98 mm
Bleed beyond trim
2 mm each edge
Safe margin inside trim
3 mm inside trim

Show guides

Card types and features above turn on their matching guides. You can hide each guide here; checks still include selected features. Chip is on the front and stripe is on the back. Signature panels use the side you choose. Holes and slots mirror on the upright back to show the same physical cut.

Position your artwork

Adjustments apply to this preview. Make final changes in your original design file.

No artwork loaded · Choose a front or back file to begin.

Download blank CR80 artwork templates

Choose just the file you need. These blank templates follow your card setup above; your uploaded artwork is not included.

Change card settings

Standard plastic card · Landscape · 2 mm bleed · 3 mm safe margin

This setup uses the features selected above, including any guides you have hidden in the preview. Remove all guides and labels before exporting your finished artwork.

Photoshop PSD

300 DPI · Separate guide layers

Illustrator / vector SVG

Editable named guide groups

Layered PDF

Front & back · Trim and bleed boxes

PNG reference for Canva

300 DPI · Guides drawn into image

Prefer a ZIP pack? Download all formats together
All template packs (ZIP)

Or choose a ready-made pack below: PSD, SVG, PDF and PNG, front and back, in landscape and portrait, with 2 mm bleed and a 3 mm safe margin.

Ready-made stripe packs use the 3-track guide. For a 2-track template, select it above, then choose an individual file or “This setup (ZIP)”.

Download your check report

Add artwork above to download these review files.

Download a CR80 template: PSD, SVG, PDF or PNG

Choose the format that works with your design software. Blank templates use your selected card orientation, bleed, safe margin and card features. Your uploaded artwork is not included. Templates include the selected card features even when their guides are hidden in the preview.

File formats and uses
FileUseful forWhat you get
PSD with layersPhotoshop and compatible editorsA 300 DPI template with each guide on a separate layer, plus an artwork layer for your design.
SVG with layersIllustrator, Inkscape and vector editorsEditable vector guides in named groups; Inkscape recognises them as layers.
PDF with layersAcrobat and sharing with your designer or printerFront and back pages with trim and bleed boxes, and individually named guide layers.
PNG templateCanva and image editorsA 300 DPI image with bleed and the guides drawn into the image.
Check report PDFSharing your artwork checkYour artwork preview, card settings and check results. This is a review document.

For editable vector guides in Illustrator, choose SVG. In Canva, use the PNG as a positioning reference and remove it before exporting your artwork. Remove guide layers and labels from your final print file, then check the exported file.

Template dimensions and feature positions

The finished card is 85.60 × 53.98 mm. The default template adds 2 mm bleed around the outside and marks a 3 mm safe margin inside the trim.

These are the template’s starting guide positions, measured from the top-left trim corner in landscape. Portrait turns the layout 90° clockwise. Hole and slot positions are set on the front; the upright back mirrors the same physical cut.

Landscape feature guide measurements
FeatureTemplate position
Contact chip — frontEight-contact: 13 × 11.8 mm, positioned 8.56 mm from the left and 17.99 mm from the top. Six-contact: 11 × 8.3 mm, positioned 9.56 mm from the left and 18.47 mm from the top.
Magnetic stripe — backChoose 2-track (8.40 mm wide) or 3-track (12.70 mm wide). Both run edge to edge, beginning 4.5 mm below the top.
Signature panelThe starting example is 75 × 8 mm on the back, centred horizontally and 19.9 mm from the top. Choose either side and adjust its size and position above. Other panel shapes can be arranged.
Embossing — frontNumber guide: 4.32 mm high, centred 32.56 mm below the top and starting 10.18 mm from the left. Name guide: 68.58 × 14.53 mm, ending 3.3 mm above the bottom.
Slot punch12.7 × 3.2 mm. Choose the centre of a long or short edge, the centre of the card, or a custom position and direction. Edge presets start 4.76 mm in from the selected edge.
Round holeStarts at 5 mm diameter. Choose an edge centre, corner, card centre or custom position, and adjust the diameter. Edge and corner presets normally place the centre 7.5 mm from the relevant edges.
RFID/NFC antenna zoneThe band between centred 81 × 49 mm and 64 × 34 mm rectangles. Confirm the selected layout when ordering.

Why pixel dimensions vary: At 300 DPI, our finished card rounds to 1011 × 638 pixels. With the default 2 mm bleed, the template rounds to 1058 × 685 pixels. Portrait swaps these dimensions. PDF and SVG retain the exact millimetre dimensions; raster files must round to whole pixels.

Getting your artwork ready

Standard cards measure 85.60 × 53.98 mm. Landscape and portrait are the same size, turned sideways or upright.

With our default settings, extend backgrounds 2 mm beyond the finished card edge and keep text and logos at least 3 mm inside it. Keep important details clear of chips, magnetic stripes, signature panels and holes.

Add your design to the blank template, then remove all guide layers and labels before sending your final artwork to print. In Canva, remove the PNG guide image before exporting.

Prepare your artwork for printing

Start with a blank CR80 template or add your existing front and back artwork to check its fit. Review bleed, safe margins and the positions of features such as magnetic stripes, signature panels and holes. Download templates in PSD, SVG, PDF or PNG format. Your uploaded artwork stays in your browser.

Choosing the card first makes artwork preparation easier. Explore our custom plastic card printing range to compare formats and uses. For printed plastic business cards, check that contact details remain clear at card size. For membership card printing, allow space for the longest names and member numbers. Artwork for magnetic stripe cards should account for the stripe’s position.

Need help finishing the layout? Our plastic card design and artwork services can adapt your existing files, arrange personalised details and prepare the design for printing.

CR80 artwork layout
Card artwork with CR80 trim, bleed and safe-area guides Example artwork with an 85.60 by 53.98 mm rounded trim line, 2 mm bleed outside the card and a 3 mm safe margin inside. 85.60 mm 53.98 mm
2 mm bleed Trim edge 3 mm safe margin

Use the preview to review positioning and the automated results to flag bleed coverage, resolution and detail near guides. Artwork is fitted to the preview; original file dimensions are not validated. Keep your original artwork: this check is preliminary, and our team confirms the final print file, colours and any special finishes.

Before sending your design to print, use our artwork checklist to review fonts, images and any special-finish layers.

Ready to print your plastic cards?

Tell us how many cards you need and how you’ll use them. We’ll help you choose the right options and quote your order.

Get a quote